| Effective Date |
Description of Change
| Download |
| 07/30/2018 |
E-18-010075 - Product Improvement. OCEAN Applicator, 2151102, Item 2, Crimper Spacer, p/n 455888-4. Item 3, Floating Shear, p/n 1803095-3. Removed Item 28. Item 30, Strip Guide Spacer, p/n 2-2844962-6. This is an improvement over the current design resulting in the optimization of the strip guide and the feeding of the terminals. No changes required to the current revision. |
Download |
| 04/30/2018 |
E-18-005659 - Product Improvement. OCEAN applicator 2151743 has been upgraded to OCEAN 2.0, to include: enhanced terminal strip guide assembly and wire crimp height ram assembly. NOTE: NO change to previous applicator revisions are required. Where listed on the applicator logs-sheet, all terminals have been qualified using the stated crimp specification. OCEAN applicator 2151102 has been upgraded to OCEAN 2.0, to include: enhanced terminal strip guide assembly and wire crimp height ram assembly. NOTE: NO change to previous applicator revisions are required. Where listed on the applicator logs-sheet, all terminals have been qualified using the stated crimp specification. OCEAN applicator 2151066 has been upgraded to OCEAN 2.0, to include: enhanced terminal strip guide assembly and wire crimp height ram assembly. NOTE: NO change to previous applicator revisions are required. Where listed on the applicator logs-sheet, all terminals have been qualified using the stated crimp specification. |
Download |
| 02/28/2018 |
E-18-001779 - Product Improvement. OCEAN Applicator, 2151102. Item 34, Terminal Support, p/n 2-1752356-7. Added terminal support to optimize the bending of the terminal during the crimping process. |
Download |
| 01/19/2018 |
E-17-013045 - Product Improvement. Item 177, Spring Pin, part number 993111-1 was removed. This part was included unnecessarily and is not needed. |
Download |
| 08/31/2017 |
E-17-011340 - Product Improvement. Updated Item 2, Crimper Spacer, P/N 45888-5, Item 5, Shear Depressor, 2119757-1, and Item 82, 1-455888-4. Crimper spacers changed to achieve better insulation or wire barrel coverage. Shear depressors changed to optimize crimp timing. No change necessary to current revision applicator. Crimps qualified against the correct crimp specification are assumed to meet product performance requirements. |
Download |
| 05/19/2015 |
E-15-006502 - Product Improvement. |
Download |
