1-1534127-1

AMP MCP 2.8 SOCKET HSG.,21POS.ASSY

Enhance your industrial and commercial transportation systems with the AMP MCP 2.8 SOCKET HSG. This 21-position assembly, part of the LEAVYSEAL series, features a durable PBT GF housing for female terminals, ensuring reliable signal transmission in harsh environments. With an IP67 and IP6K9K rating, it provides excellent protection against dust and water ingress. Operating temperature ranges from -40 to 120°C (-40 to 248°F), making it suitable for a wide range of applications. The 90° cable exit angle and 6.9 mm row spacing offer flexibility in installation. With a nominal voltage architecture of 12V and 24V, and a current rating of up to 7A, this connector is perfect for power and signal transmission. Its black housing, measuring 2.724 inches in length, 1.492 inches in height, and 1.72 inches in width, ensures easy integration. The AMP MCP 2.8 SOCKET HSG is RoHS compliant, guaranteeing environmentally friendly manufacturing processes. Upgrade your wire-to-wire, wire-to-board, or wire-to-device connections with this high-quality connector.
AVAILABILITY
Immediate Shipment:NA
Stock Location:In Stock
Factory Stock:Call for Stock
Factory Lead:
Unit Of Measure:
Minimum/Multiple:1/1
Pricing
CALL:800.400.7041
Product Category:
Manufacturer:TE Connectivity
Manufacturer Part Number:TE Connectivity 1-1534127-1
Series:LEAVYSEAL
Gender:Housing for female terminals
Number of Rows:3
Pitch:.197 in, 5 mm
Voltage:28 V DC
IP Rating:IP67, IP6K9K
Strain Relief:Yes
Row Spacing:.272 in, 6.9 mm
Polarization:No
Body Material:PBT GF
Number of Positions:21
Operating Temperature Range:-40 - 120 °C, -40 - 248 °F
Circuit Application:Signal
Sealable:Yes
Connector System:Wire to Board, Wire-to-Device, Wire to Wire
Length:2.724 in
Cable Exit Angle:90°
Height:1.492 in, 37.9 mm
Width:1.72 in, 43.7 mm
Mating Tab Width:.11 in, 2.8 mm
Nominal Voltage Architecture:12 V, 24 V
Body Color:Black
Serviceable:Yes
Mounting Feature:Without
Terminal Position Assurance:Yes
Connector Position Assurance Capable:No
Hybrid Connector :No
Primary Locking Feature:On the Terminal
Material Flammability Standard:UL 94-HB
Part Aliases:1-1534127-1
SKU:AMP1-1534127-1

Environmental Initiative Details

Environmental Initiative:RoHS
Compliant:Unknown
Date of this Information:Unknown
Notes:

Product Change Notice

Effective DateDescription of ChangeDownload
09/29/2024PCN-24-204878 - Material Change. TE Connectivity is making a material change to for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) < are > affecte
Product Change Notice Download
08/11/2024PCN-23-192354 - Adding New Capacity Tooling. TE Connectivity is adding new capacity tooling for the secondary locking device for the part number(s) listed below. These PNs are customer restricted designs and require customer approval before shipment. Please provide us with your immediate approval to prevent shipment delays. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are not affected.
Product Change Notice Download
10/30/2022PCN-22-146685 - Adding New Capacity Tooling. TE Connectivity is adding new capacity tooling for 21POS,AMP MCP2.8,REC HSG,ASSY for the part number(s) listed below. These PNs are customer restricted designs and require customer approval before shipment. Please provide us with your immediate approval to prevent shipment delays. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing is not affected.Product Change Notice Download
10/14/2022P-22-023324 - tool and/or processes from TE Connectivity Kurim (CZ) to TE Connectivity Morocco ICT. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. Product Change Notice Download
11/22/2021P-21-021511 - Manufacturing location change. We hereby inform you that TE is performing a change in the production location place. This movement will not impact manufacturing technology nor staff. The related part/process approvals will be done in accordance with TE internal standards and upon request, customer requirements.Product Change Notice Download
04/15/2021P-21-020595 - Manufacturing location change. Transfer of duplicity tool for Following already transferred Part Numbers from TE Kurim Czech Republic to TE Tangier ICT Morocco.
Product Change Notice Download
03/30/2021P-20-019183 - Manufacturing Location Change. Brazil Production is to better meet customer demands and improve our delivery. The Brazil Manufacturing location operates under certificated quality management system in accordance with standard concerned automotive requirements.
Product Change Notice Download
03/12/2021E-20-010814 - Lever and slide correction. Lever and Slide correction to improve handling in field. No further impact by customer. no visual change to product.
Product Change Notice Download
06/01/2020P-19-018370- Following molding Part Numbers will be transferred from TE Kurim Czech Republic to TE Morocco ICT: PN 1355228-1 PN 1355228-2Product Change Notice Download
05/01/2020P-20-018614 - Manufacturing Location Change. Molding moving from TE Kurim Czech Republic to TE Morocco.Product Change Notice Download
03/27/2020P-20-018640 - Manufacturing Location Change. As a result of our continuous strive for quality improvements of our production, we hereby inform you upfront about a new tool 21-1949076, which is under construction In order to meet all specification requirements to replace the current one, which is worn out and also production location changing from Supplier Formplast / CZ to TE plant ICT / Morocco.Product Change Notice Download
01/15/2020E-19-007638 - Product Improvement. Reducing the height of the hook in one of the two mold to have equal operation forces with slides of both molds.Product Change Notice Download
07/12/2019P-19-017214 - Capacity change or tool replacement. Tool 31-1829917, which is under construction In order to meet all specification requirements to cover increasing market demand and which will run in addition to the current one.

Product Change Notice Download
03/15/2019P-19-016972 - Tool Duplication. As result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool, which is constructed meeting all specification requirements to cover increasing market demand and which will run in the TE ICT Plant Tangier.Product Change Notice Download
05/31/2016E-16-002055 - Product Improvement. Minor change on Receptacle Housing. Adding to pockets in Rec. Housing, cavity block area to create more space for the counter part (cavity block) to avoid appearance of plastic chips in production.Product Change Notice Download
01/20/2014P-13-009750 - Manufacturing location change.Product Change Notice Download