| Effective Date | Description of Change | Download |
|---|
| 03/30/2025 | PCN-24-212695 - Tool Duplication Connectivity is adding new capacity tooling for for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.
Download | |
| 04/15/2024 | PCN-23-178713 - Manufacturing location change. TE Connectivity is transferring component Guard Cam of the following part number(s) from current Approved Supplier location, England to future Approved Supplier location, Netherlands. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tool back to prior location/supplier based on business need. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. | Download |
| 03/07/2024 | PCN-23-186594 - Adding new capacity tooling. TE Connectivity is adding new capacity tooling for slide for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) is not affected.
| Download |
| 11/29/2023 | PCN-23-177153 - Material Change. E Connectivity is making a material change of a connector component to PA66-GF30 with a lower CO2 footprint for the part number(s) listed below. Material in use and alternative material are interchangeable to have a Dual Source and a robust delivery performance for customer. Both materials can be identified with the material marking. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s), are not affected. | Download |
| 12/29/2022 | PCN-22-157801 - Location Change. TE Connectivity is transferring a part (LEVER, 62POS.PN 1394684-1 / 1823499-1) of the following part number(s) from current TE plant Kurim location, Czech Republic to future TE plant Tangier ICT, Morocco. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tool back to prior location/supplier based on business need. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. | Download |
| 09/09/2022 | P-22-023119 - Tool Transfer. transfer of tool from TE Connectivity Kurim (CZ) to TE Connectivity Morocco ICT. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released. | Download |
| 07/15/2022 | P-22-022822 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity Kurim in Czech Republic to TE Connectivity Tangier ICT in Morocco: PN 1394689-1 PN 1394689-2 | Download |
| 06/13/2022 | P-22-022517 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity manufacturing location in Hungary to TE Connectivity manufacturing in Morocco. | Download |
| 06/03/2022 | P-22-022464 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity manufacturing location in Hungary to TE Connectivity manufacturing locationin Morocco. | Download |
| 05/30/2022 | P-22-022516 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity manufacturing location in Hungary to Connectivity manufacturing location in Morocco. | Download |
| 04/22/2022 | P-22-022363 - Mold tool Duplication. As a result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool 21-1960991 , which is under construction In order to meet all specification requirements to cover increasing market demand and which will run in addition to the current one.
| Download |
| 03/28/2022 | P-22-022166 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity manufacturing location in Hungary to TE Connectivity manufacturing location in Morocco. | Download |
| 03/04/2022 | P-22-022128 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity Kurim Czech Republic to TE Connectivity Tangier ICT Morocco | Download |
| 07/28/2021 | PCN-21-103218 - Manufacturing locations added. The Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity tooling for 39pos and 62pos Rec Housing Housing, Cavity Block, Secondary Locking, Slides, Lever, Guard Cam and Seal
| Download |
| 06/08/2021 | PCN-21-103206 - Manufacturing locations added TE Connectivity Shanghai. Dear Customer, we hereby inform you of this change. The new tooling is necessary to meet the increased demand in Asia Pacific. The added tooling does not impact connector performance. They will now also be manufactured at China TE Connectivity manufacturing location Shanghai. An internal release based on our specifications will be executed before any parts will be delivered, which guarantees the performance. | Download |
| 02/05/2021 | P-20-019943 - Manufacturing location change. Following Part Numbers will be transferred from TE Connectivity Hungary to TE Connectivity manufacturing location in Tangier, Morocco. | Download |
| 10/18/2019 | P-19-017181 - Capacity change or tool replacement. Tool replacement of a molding tool for PN 1823499-1,1394684-1.
| Download |
| 05/19/2019 | P-19-017370 - Product Improvement. Leavy seal Packaging orientation change.
| Download |
| 09/25/2018 | P-18-016250 - Product improvement. New semi-automatic line 51-1085438 in order to fulfill customer demand. | Download |
| 10/02/2017 | P-17-014610 - Manufacturing location change. Following Part Number (Component) will be transferred from supplier LPVM Czech Republic to TE Kurim Czech Republic. | Download |
| 08/01/2017 | P-17-014510 - Manufacturing location change. Following molding Part Numbers will be transferred from supplier LPVM Czech Republic to TE Kurim Czech Republic. | Download |
