The MQS BLINDSTOPFEN4MM, a vital component for sealing automotive connectors. Designed for 4mm cavities, this blue plug ensures efficient protection against dust, debris, and moisture. Part of the MQS series, it guarantees a secure fit and reliable performance in demanding automotive applications. Compliant with RoHS regulations, it meets strict environmental standards. Trust in this essential accessory from our Automotive Seals & Cavity Plugs collection to maintain the integrity of your vehicle's electrical connections.
AVAILABILITY
Immediate Shipment:NA
Stock Location:In Stock
Factory Stock:Call for Stock
Factory Lead:
Unit Of Measure:
Minimum/Multiple:1/1
Pricing
CALL:800.400.7041
Product Category:
Manufacturer:TE Connectivity
Manufacturer Part Number:TE Connectivity 967056-1
Color:Blue
Series:MQS
Seal Type:Cavity Blanking Plug
Product:Automotive Seals & Cavity Plugs
SKU:AMP967056-1
Material:Silicone
Cavity Diameter:3.6 mm / .142 in
Cable Insulation Diameter:4.1 mm / .161 in
UL Flammability Rating:None
Lubricant Content:No
Resistance to Hydrocarbons:Poor
Shore A Hardness:50
Operating Temperature Range:-40 - 130 °C / -40 - 266 °F
Part Alias:EG9739-000,AMP-0-0967056-1

Environmental Initiative Details

Environmental Initiative:RoHS
Compliant:Unknown
Date of this Information:Unknown
Notes:

Product Change Notice

Effective DateDescription of ChangeDownload
10/02/2023P-23-024982- New specification.inform about SAP labeling standardization for single wire seal. The change has no impact to form-fit-function. Please see more details in attachment. List of affected PNs is provided as attachment to this PCN. This is an informational PCN and no formal PPAP will be submitted. During the transition phase mixed shipments with both label layout can occur till the date mentioned in this PCN. In case further details are needed about the exact future state label layout, please contact your sales representative. Please provide your statement to this PCN within 2 weeks after receiving of it. Product Change Notice Download
01/13/2023P-22-023612 - Min order quantity alignment. TE is changing its system as it relates to minimum order quantities for the part numbers listed to address trends that have been recently observed. We have identified situations where quantities can be ordered at quantities below what our standard packaging requirements allow. The situation also results in non-standard handling (break-pack) and creates risks for damage during transit to our customers. Therefore, we are making changes to align minimum order quantities with appropriate standard packaging requirements for these part numbers.Product Change Notice Download
01/13/2023P-22-023726 - MOQ Change Alignment.TE is changing its system as it relates to minimum order quantities for the part numbers listed to address trends that have been recently observed. We have identified situations where quantities can be ordered at quantities below what our standard packaging requirements allow. The situation also results in non-standard handling (break-pack) and creates risks for damage during transit to our customers. Therefore, we are making changes to align minimum order quantities with appropriate standard packaging requirements for these part numbers.Product Change Notice Download
08/05/2022P-21-021707 - Product improvement. we hereby inform you about the duplication of a molding tool for the TE component part "MQS BLINDSTOPFEN4MM". Tool build at supplier and serial production at TE San Salvo, As a result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool 21-1959349, which is under construction in order to meet all specification requirements to cover increasing market demand and which will run in addition to the current one.Product Change Notice Download
08/01/2022P-21-021823 - Manufacturing location change. Duplication tool for the following parts. Following Part Numbers will be transferred from Europe to TE Suzhou China. The product will only ship to Asian-Pacific customer. We will provide the PPAP to Asian-Pacific customer, and will not provide to other country customerProduct Change Notice Download
01/15/2020P-20-018416 - Product Improvement. Change of color paste with slight change on blue color. This change of color paste is intended to standardize our products and our processes and it will not affect Form, Fit and Function of the product as proved and validated.Product Change Notice Download
04/19/2019P-18-016246 - Tool duplication of a molding tool for the TE part number 967067-1,967067-2,967056-1.Product Change Notice Download
04/21/2017P-16-013834 - New Tooling.Product Change Notice Download
04/11/2016P-16-012575 - UPDATE TO PCN P-16-012523. To ensure a smooth and stable transition from SWDC to EPDC, TE will be delaying the transition from the current Santa Teresa, NM DC (SWDC) to the new El Paso, TX DC (EPDC), originally scheduled to implement February 8th - 15th, is now scheduled to implement April 11th - 15th. This delay will allow extended testing on all SAP systems and procedures to ensure a seamless transition into the new warehouse. As we migrate the product and go-live on the new SAP WM software, it is critical to ensure this testing and training is fully incorporated into the systems and operational processes in the new El Paso warehouse. Based on the revised timing of transition, both Customer Shipments and Supplier Deliveries will continue to process from the Santa Teresa, NM location: Address: 101 Lindbergh, Santa Teresa, NM 88008, DUNS Code: 036967748. See attached Customer Letter.Product Change Notice Download
02/15/2016P-16-012523 - Location Change. TE has established a new Distribution Center in El Paso, TX to support our South-West Customers. The transition to El Paso will take place during the weekend of February 13th - 14th.Product Change Notice Download
08/20/2015P-15-011803 - Product Improvement. New tool 967056-1.Product Change Notice Download
04/28/2014P-14-009870 - Document clarification.Product Change Notice Download